Thursday, March 10, 2011

How To Flash Samsung Bada S8500 with MultiLoader 5.62

First time download all you need to flash the Phone :
Multiloader v 5.62
USB Driver Download
Firmware Download if need password just text samsung-firmwares.com or samfirmware.com


Preparations & Connection
-  Prepare Mini USB cable for connecting to PC with Mobile.
    -  Before do this download procedure, Samsung Broadcom USB Driver must be in the PC.
-  You have to set up semseyite-V5_02_0_0-customer-free modem driver to download SW properly.

Setting & Downloading
Connect the cable to S8500 while you press SEND and Power Button(Before JC3) or Volume DOWN + LOCK key and Power Button(onward JC3) (You can see ‘DOWNLOAD’ message on the LCD)
Run S8500 downloader (MultiLoader v5.62) application as below.
Select LSI6410 as below

 - Tick Boot Change and and Tick Full Download (don't tick "Full Download" if you just upgrade firmware, and firmware isn't "FULL")
View Profile
« on: September 03, 2010, 05:22:25 AM »

Firmware's download: http://www.samsungwaveforum.com/samsung-wave-updates/all-firmwares-s8500xx***-download/msg3373/#msg3373

* How to Download SAMSUNG BADA S8500 *


Preparations & Connection
-  Prepare Mini USB cable for connecting to PC with Mobile.
    -  Before do this download procedure, Samsung Broadcom USB Driver must be in the PC.
-  You have to set up semseyite-V5_02_0_0-customer-free modem driver to download SW properly.
  
Setting & Downloading
Connect the cable to S8500 while you press SEND and Power Button(Before JC3) or Volume DOWN + LOCK key and Power Button(onward JC3) (You can see ‘DOWNLOAD’ message on the LCD)
Run S8500 downloader (MultiLoader v5.62) application as below.
Select LSI6410 as below



 - Tick Boot Change and and Tick Full Download (don't tick "Full Download" if you just ugrade firmware, and firmware isn't "FULL")


Click Boot and select Boot folder.
“CAUTION : please do not select BOOTFILES_EVTSF folder, the sample should be dead”
Click AMSS and select ‘amss.bin’ file which is located in the PC
Click Apps and select ‘apps_compressed.bin’ file which is located in the PC
Click Rsrc1 and select ‘Rsrc_ Open_Europe_Common.rc1
Click Rsrc2 and select ‘Rsrc2_ (Low/Mid).rc2
Click Factory FS and select ‘FactoryFs_ Open_Europe_Slav.ffs
Click CSC and select ‘S8500XXXXX.csc
Click SHP APP and select ‘ShpApp.app
Otherwise you can drag and drop
After connecting the mobile with PC, Multiloader will be find the COM port automatically. If it cannot find COM port please connect USB cable again and press port search.
Click Download [You will see the downloading progress bar]
-After finishing downloading, the mobile will be starting automatically.

Set configurations for your settings with String codes.

-    Administration mode: *#5239870*#
-    Pre-configuration: Administration mode -> *#27236*#
-    Internal mode: Administration mode -> *#7092463*#
-    Camera Firmware update -> *#36287# -> Press 3 then wait for 4 min











No comments:

Post a Comment