How To Register Beta Zone and install FB 2.0.0.13

Open web http://hidemyass.com/

or http://www.ezprxy.com/

Edit Link and Press Enter

Follow the direction

 You will be followed to term & conditions page, just tick "i agree" and then next.

After that you will get a confirmation email in your mailbox, just click the link to verification your email.

After activation, just login to https://www.blackberry.com/beta/ with your email and password and starts to download FB beta zone. Good Luck.

Any Question Just PM me. Thankx

da_goz87@yahoo.com / 2198B4EB

How To Unlock LG GR500F with Octopus

No Need driver to unlock LG GR 500F

First Step just Connect The Jumper on Phone as show as the below picture

 

After Jumper, Just Put the Battery to mobile phones. Connect the octopus box to computer.

Select model and Clik Unlock.

Hold (+) ringer Button, and connect the micro usb cable / v9 to the mobile phone.

And your phone has successfully unlocked.

How To Flash Samsung Bada S8500 with MultiLoader 5.62

First time download all you need to flash the Phone :
Multiloader v 5.62
USB Driver Download
Firmware Download if need password just text samsung-firmwares.com or samfirmware.com


Preparations & Connection
-  Prepare Mini USB cable for connecting to PC with Mobile.
    -  Before do this download procedure, Samsung Broadcom USB Driver must be in the PC.
-  You have to set up semseyite-V5_02_0_0-customer-free modem driver to download SW properly.

Setting & Downloading
Connect the cable to S8500 while you press SEND and Power Button(Before JC3) or Volume DOWN + LOCK key and Power Button(onward JC3) (You can see ‘DOWNLOAD’ message on the LCD)
Run S8500 downloader (MultiLoader v5.62) application as below.
Select LSI6410 as below

 

 - Tick Boot Change and and Tick Full Download (don't tick "Full Download" if you just upgrade firmware, and firmware isn't "FULL")

Device Flash tutorial - Samsung S8500 « on: September 03, 2010, 05:22:25 AM »

---

Firmware's download: http://www.samsungwaveforum.com/samsung-wave-updates/all-firmwares-s8500xx***-download/msg3373/#msg3373

* How to Download SAMSUNG BADA S8500 *


Preparations & Connection
-  Prepare Mini USB cable for connecting to PC with Mobile.
    -  Before do this download procedure, Samsung Broadcom USB Driver must be in the PC.
-  You have to set up semseyite-V5_02_0_0-customer-free modem driver to download SW properly.
  
Setting & Downloading
Connect the cable to S8500 while you press SEND and Power Button(Before JC3) or Volume DOWN + LOCK key and Power Button(onward JC3) (You can see ‘DOWNLOAD’ message on the LCD)
Run S8500 downloader (MultiLoader v5.62) application as below.
Select LSI6410 as below

 - Tick Boot Change and and Tick Full Download (don't tick "Full Download" if you just ugrade firmware, and firmware isn't "FULL")

Click Boot and select Boot folder.
“CAUTION : please do not select BOOTFILES_EVTSF folder, the sample should be dead”
Click AMSS and select ‘amss.bin’ file which is located in the PC
Click Apps and select ‘apps_compressed.bin’ file which is located in the PC
Click Rsrc1 and select ‘Rsrc_ Open_Europe_Common.rc1’
Click Rsrc2 and select ‘Rsrc2_ (Low/Mid).rc2’
Click Factory FS and select ‘FactoryFs_ Open_Europe_Slav.ffs’
Click CSC and select ‘S8500XXXXX.csc’
Click SHP APP and select ‘ShpApp.app’
Otherwise you can drag and drop
After connecting the mobile with PC, Multiloader will be find the COM port automatically. If it cannot find COM port please connect USB cable again and press port search.
Click Download [You will see the downloading progress bar]

-After finishing downloading, the mobile will be starting automatically.

Set configurations for your settings with String codes.

-    Administration mode: *#5239870*#
-    Pre-configuration: Administration mode -> *#27236*#
-    Internal mode: Administration mode -> *#7092463*#
-    Camera Firmware update -> *#36287# -> Press 3 then wait for 4 min

How To Change CSC Samsung s8500 without Flashing

Before you flash their is another way to debrand without flashing and keeping the same firmware.
Enter *#5239870*# to enter admin mode
Choose "Pre-configuration"
You'll be prompted for an operator code. click on the field then Enter: *#27236*#
You'll then be at the CSC Pre-configuration screen ... Here one can choose which provider the phone belongs to..

Depending on the CSC code you will see:
KOR (KOREAN – OPEN)
VMA (Virgin Mobile Australia)
OPT (Optus)
TEL (Telstra)
H3G (Three)
VDF (Vodafone)

If you only see
KOR
VMA
You can switch it to KOR which makes your handset generic, it will remove most of the Virgin spam.
Make sure you back up all your data if you use this method as it will reset the handsets settings.

How To Use UFC GPG Cable

Contains :
UFC Pinout Selector 5.6
UFC PinOut 2010
Nokia Cable Finder
Text recomended for 3,3k, 5,1k, 7k, and 10k

How To Delete 'Skeleton' Logo Greenpois0n

Easy way is just
Added Cydia repository:http://repo.insanelyi.com
Then you can install “Remove Greenpois0n Bootlogo”
And then reboot iPhone and
Done.